Cisco C1000-16P-2G-L - Cisco Catalyst 1000 Series Switches

Cisco C1000-16P-2G-L – Cisco Catalyst 1000 Series Switches

(1 customer review)

C1000-16P-2G-L

16x 10/100/1000 Ethernet POE+ ports and 120W POE budget, 2x 1G SFP uplinks

Cisco Catalyst 1000 Series Switches are fixed-managed Gigabit Ethernet enterprise-class Layer 2 switches designed for small businesses and branch offices. T

 

Add to quote
Categories: ,

Cisco C1000-16P-2G-L  Overview

Cisco Catalyst 1000 Series Switches are fixed-managed Gigabit Ethernet enterprise-class Layer 2 switches designed for small businesses and branch offices. These are simple, flexible and secure switches ideal for out-of-the-wiring-closet and critical Internet of Things (IoT) deployments. Cisco Catalyst 1000 operates on Cisco IOS Software and supports simple device management and network management via a Command-Line Interface (CLI) as well as an on-box web UI. These switches deliver enhanced network security, network reliability, and operational efficiency for small organizations.

Quick Specs

Table 1 shows the Quick Specs.

Product Code

C1000-16P-2G-L

Description16x 10/100/1000 Ethernet PoE+ ports and 120W PoE budget, 2x 1G SFP uplinks
Gigabit Ethernet ports16
Uplink interfaces2 SFP
PoE+power budget120W
FanlessY
Dimensions (WxDxH in inches)10.56 x 11.69 x 1.73
CPUARM v7 800 MHz
DRAM512 MB
Flash memory256 MB
Forwarding bandwidth18Gbps
Switching bandwidth36Gbps
Forwarding rate(64 byte L3 packets)26.78 Mpps

Product Details

The Cisco Catalyst 1000 Series Switches provides these features:

  • 8 16, 24, or 48 Gigabit Ethernet data or PoE+ ports with line-rate forwarding
  • 2 or 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP)/RJ 45 Combo uplinks or 4 fixed 0 Gigabit Ethernet Enhanced SFP (SFP+) uplinks
  •  Perpetual PoE+ support with a power budget of up to 740W
  • CLI and/or intuitive web UI manageability options
  •  Network monitoring through sampled flow (sFlow)
  •  Security with 802.1X support for connected devices, Switched Port Analyzer (SPAN), and Bridge Protocol Data Unit (BPDU) Guard
  • ● Compact fanless models available with a depth of less than 13 inches (33 cm)
  •  Device management support with over-the-air access via Bluetooth, Simple Network Management Protocol (SNMP), RJ-45, or USB console access
  • Reliability with a higher Mean Time Between Failures (MTBF) and an enhanced limited lifetime warranty support(E-LLW)

 

C1000-16P-2G-L Specification

 

C1000-16P-2G-L Specifications

Gigabit Ethernet ports16
Uplink interfaces2 SFP
PoE+power budget120W
FanlessY
Dimensions (WxDxH in inches)10.56 x 11.69 x 1.73

Console ports

RJ-45 Ethernet1
USB mini-B1
USB-A port for storage and Bluetooth console1

Memory and processor

CPUARM v7 800 MHz
DRAM512 MB
Flash memory256 MB

Performance

Forwarding bandwidth18 Gbps
Switching bandwidth36 Gbps
Forwarding rate(64—byte L3 packets)26.78 Mpps
Unicast MAC addresses16000
IPv4 unicast direct routes542
IPv4 unicast indirect routes256
IPv6 unicast direct routes414
IPv6 unicast indirect routes128
IPv4 static routes16
IPv6 static routes16
IPv4 multicast routes and IGMP groups1024
IPv6 multicast groups1024
IPv4/MAC security ACEs600
IPv6 security ACEs600
Maximum active VLANs256
VLAN IDs available4094
Maximum STP instances64
Maximum SPAN sessions4
MTU-L3 packet9198 bytes
Jumbo Ethernet frame10,240 bytes
Dying GaspYes
MTBF in hours (data)2,165,105
MTBF in hours (PoE)706,983
MTBF in hours (Full PoE)\

Environmental

Operating temperature Seal level-5 to 50°C*
Up to 5,000ft (1500 m)-5 to 45°C
Up to 10,000 (3000 m)-5 to 40°C
Operating altitude10,000 ft (3,000m)
Operating relative humidity5% to 90% at 40v
Storage temperature-13 to 158°F (-25 to 70°C)
Storage altitude15,000 ft (4500m)
Storage relative humidity5% to 95% at 65°C
*Note:

50°C operation is supported for short term operation only; GLC-BX-D/U and CWDM optics cannot support 50°C operation; Minimum ambient temperature for cold start is at 0°C (32°F)

Safety and compliance

SafetyUL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1, IEC 62368-1, UL 62368-1

GB 4943.1-2011

EMC: Emissions

 

47CFR Part 15 Class A, AS/NZS CISPR32 Class A, CISPR32 Class A, EN55032 Class A, ICES-003 Class A, VCCI-CISPR32 Class A, EN61000-3-2, EN61000-3-3, KN32 Class A, CNS13438 Class A
EMC: ImmunityEN55024 (including EN 61000-4-5), EN300386, KN35
EnvironmentalReduction of Hazardous Substances (RoHS) including Directive 2011/65/EU
TelcoCommon Language Equipment Identifier (CLEI) code
U.S. government certificationsTBD

Connectors and interfaces

Ethernet interfaces

 

 

* 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted Pair (UTP) cabling

* 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling

* 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

* 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

Indicator LEDs

 

* Per-port status: link integrity, disabled, activity

* System status: system

Console cables

 

* CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45

* CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors

Power

 

* Use the supplied AC power cord to connect the AC power connector to an AC power outlet

* Models have external power supply

 

1 review for Cisco C1000-16P-2G-L – Cisco Catalyst 1000 Series Switches

  1. J –

    This didn’t disappoint. Perfect for what I needed.

Add a review

Your email address will not be published. Required fields are marked *

Related products